QtDragon, Linuxcnc 2.9pre, and Debian 12 (bookworm)

More
4 years 1 month ago #252174 by Roguish
Replied by Roguish on topic QtDragon, Linuxcnc 2.9pre, and Debian 12 (bookworm)
I will check that out too.
  THANKS.
you are correct. I made that single change and design loaded with my .ui file.....
hope I don't find other bugs..........  will report back.
 

Please Log in to join the conversation.

Time to create page: 0.027 seconds
Powered by Kunena Forum