2+2+3 More Plasma builds, double the joy ! 3X2M and 2.5X1.5M cnc plasma build.

More
5 years 11 months ago #190568 by tommylight
Replied by tommylight on topic 2+2+3 More Plasma builds, double the joy ! 3X2M and 2.5X1.5M cnc plasma build.
It's up ! :)
Did some more work today on the new shop, luckily it is sunny lately although during the night it gets to 6 below 0.

Attachment not found

Please Log in to join the conversation.

  • thefabricator03
  • New Member
  • New Member
More
5 years 11 months ago #190570 by thefabricator03
Replied by thefabricator03 on topic 2+2+3 More Plasma builds, double the joy ! 3X2M and 2.5X1.5M cnc plasma build.
Its looking good.Ill trade you temps, its 39 at the moment with a top of 42.

Please Log in to join the conversation.

More
5 years 11 months ago #190572 by tommylight
Replied by tommylight on topic 2+2+3 More Plasma builds, double the joy ! 3X2M and 2.5X1.5M cnc plasma build.

thefabricator03 wrote: Its looking good.Ill trade you temps, its 39 at the moment with a top of 42.

OOO yes ! :)
I love summer, to bad i can not have it all the time.

Please Log in to join the conversation.

More
5 years 11 months ago #190574 by johnmc1
Replied by johnmc1 on topic 2+2+3 More Plasma builds, double the joy ! 3X2M and 2.5X1.5M cnc plasma build.
42c here yesterday .
Shed footing looks interesting.
Is the shed footing fully covered with concrete?
cheers john

Please Log in to join the conversation.

More
5 years 11 months ago #190577 by tommylight
Replied by tommylight on topic 2+2+3 More Plasma builds, double the joy ! 3X2M and 2.5X1.5M cnc plasma build.

johnmc1 wrote: Is the shed footing fully covered with concrete?

Will be soon enough.

Please Log in to join the conversation.

  • thefabricator03
  • New Member
  • New Member
More
5 years 11 months ago #190579 by thefabricator03
Replied by thefabricator03 on topic 2+2+3 More Plasma builds, double the joy ! 3X2M and 2.5X1.5M cnc plasma build.
Why welded and not bolted connections?

Please Log in to join the conversation.

More
5 years 11 months ago #190581 by tommylight
Replied by tommylight on topic 2+2+3 More Plasma builds, double the joy ! 3X2M and 2.5X1.5M cnc plasma build.
Saves time and gona be 2.5m above ground.

Please Log in to join the conversation.

More
5 years 11 months ago #190593 by Clive S
Replied by Clive S on topic 2+2+3 More Plasma builds, double the joy ! 3X2M and 2.5X1.5M cnc plasma build.
I see you have asked Santa to come early with his little helpers . :evil:

Please Log in to join the conversation.

More
5 years 11 months ago #190594 by tommylight
Replied by tommylight on topic 2+2+3 More Plasma builds, double the joy ! 3X2M and 2.5X1.5M cnc plasma build.

Clive S wrote: I see you have asked Santa to come early with his little helpers . :evil:

Yes, but did not bring any presents! :angry:

Please Log in to join the conversation.

More
5 years 10 months ago #191057 by tommylight
Replied by tommylight on topic 2+2+3 More Plasma builds, double the joy ! 3X2M and 2.5X1.5M cnc plasma build.
Will someone let me know when this is getting out of hand ? :)
The linear rails are here! So are the 150X150mm frame tubes and aluminium profiles for gantry and side mounts, L shaped aluminium for the reductions and motor mounts, control box for one of them is already finished and the second is nearly done, .......

Attachment not found

Please Log in to join the conversation.

Time to create page: 0.941 seconds
Powered by Kunena Forum