2+2+3 More Plasma builds, double the joy ! 3X2M and 2.5X1.5M cnc plasma build.

i didnt know there was some kind of ax named like that LOL.
USA missile all the way

shpatb wrote: USA missile all the way

We had plenty of those explode here in our country !
BTW, just so there is no miss understanding, we are very thankful to USA and the rest of the civilised world for exploding those rockets here.

tommylight wrote:

shpatb wrote: USA missile all the way

We had plenty of those explode here in our country !
BTW, just so there is no miss understanding, we are very thankful to USA and the rest of the civilised world for exploding those rockets here.

I get it now it was a cunning plan to create a war torn country so the EU would feel sorry for you and let you in. Shame no-one told the freight carriers the war is over !

Not much going on here, it is very cold so spending half the day on the main PC at home, watching youtube, modifying QTPlasmaC , preparing some PC's with LinuxCNC, arranging some data from several SSD's, waiting for some parts to arrive, dealing with two new projects - a bottle filling line and a wood/plastic/alu cnc cutting machine - so far just visiting/checking equipment/thinking/discussing/etc, etc, etc ....
And since CyberPunk 2077 has made quite a splash for all the wrong reasons, here is a picture of my current setup in all it's 24",32",24" glory:

Home work: find all the Mesa boards !

Very beefy set up.I can assume how good that deathadder feels in hands
refresh rate ?

tommylight wrote: modifying QTPlasmaC

Whatcha moddin?

shpatb wrote: Very beefy set up.I can assume how good that deathadder feels in hands
refresh rate ?

To small for my hands, or in other words i have very big paws!
Refresh is low, 32" one does 70Hz @2560X1440, 24" ones do 60Hz @1920X1200 as they are explicitly made for photo editing, but have very nice colours.

snowgoer540 wrote:

tommylight wrote: modifying QTPlasmaC

Whatcha moddin?

Oh cr@p, did i say that out loud ? Phill gona be anrgy ...
Just made everything a bit bigger as it looked puny on the above mentioned monitors @1920X1200, and i have 4 of them for the 4 machines .... soon.
BTW, i did post a picture of it somewhere.... so here it is again:

Ahh, ok. That’s quite the rapid slider :laugh:

snowgoer540 wrote: Ahh, ok. That’s quite the rapid slider :laugh:

Yup, i use the feed slider quite often when cutting to make fine adjustments.
Adding another shorter slider there to the left would end up looking like showing the middle finger!