2+2+3 More Plasma builds, double the joy ! 3X2M and 2.5X1.5M cnc plasma build.

More
5 years 5 months ago #207632 by tommylight
Replied by tommylight on topic 2+2+3 More Plasma builds, double the joy ! 3X2M and 2.5X1.5M cnc plasma build.

my1987toyota wrote: So is the total mess off camera ? LOL.

Yup yup !
Just do not ask for pictures of the old shop ! :)

Please Log in to join the conversation.

More
5 years 5 months ago #209153 by tommylight
Replied by tommylight on topic 2+2+3 More Plasma builds, double the joy ! 3X2M and 2.5X1.5M cnc plasma build.
Ahhh, much better now:

Attachment not found



Also had these two creatures wandering around the shop with some expensive equipment, so expect some better quality pictures soon.

Attachment not found

Please Log in to join the conversation.

More
5 years 5 months ago #209179 by bevins
Replied by bevins on topic 2+2+3 More Plasma builds, double the joy ! 3X2M and 2.5X1.5M cnc plasma build.
SHOW OFF!!!!

Nice shop.

Please Log in to join the conversation.

More
5 years 5 months ago #209181 by tommylight
Replied by tommylight on topic 2+2+3 More Plasma builds, double the joy ! 3X2M and 2.5X1.5M cnc plasma build.
LOL
Thank you.
Over 5 months of relentless work mostly alone, i can say i did something.

Please Log in to join the conversation.

More
5 years 5 months ago #209862 by Joco
Replied by Joco on topic 2+2+3 More Plasma builds, double the joy ! 3X2M and 2.5X1.5M cnc plasma build.
Awesome looking digs!

Please Log in to join the conversation.

More
5 years 5 months ago #209870 by tommylight
Replied by tommylight on topic 2+2+3 More Plasma builds, double the joy ! 3X2M and 2.5X1.5M cnc plasma build.
Finally, here are some of the results of that photo shoot:

Attachment not found


Attachment not found


Attachment not found


Of course, QTPlasmaC must be featured here ! :)

Please Log in to join the conversation.

More
5 years 5 months ago #209879 by Clive S
Replied by Clive S on topic 2+2+3 More Plasma builds, double the joy ! 3X2M and 2.5X1.5M cnc plasma build.
Tom are we looking at your impressive shop and machine or the poser in the pic. :evil:

You have certainly done some graft to achieve it

Please Log in to join the conversation.

More
5 years 5 months ago #209887 by Grotius
Replied by Grotius on topic 2+2+3 More Plasma builds, double the joy ! 3X2M and 2.5X1.5M cnc plasma build.
Hi Tom,

Very nice !
Certainly this is a man with a mission.
This pictures are good for trading.

Please Log in to join the conversation.

More
5 years 5 months ago #209893 by tommylight
Replied by tommylight on topic 2+2+3 More Plasma builds, double the joy ! 3X2M and 2.5X1.5M cnc plasma build.
Thank you all.
Hair and beard are gone now, another week or two and i will be bald ! :)

Please Log in to join the conversation.

More
5 years 5 months ago #209928 by Grotius
Replied by Grotius on topic 2+2+3 More Plasma builds, double the joy ! 3X2M and 2.5X1.5M cnc plasma build.
Hi Tom,

I just did a second look to the 'cool' pictures. Looking at the pc monitor. Now i get it. You are working with PlasmaC.

Just curious, after using so many years using your own develloped thc software controller, how does it feel to use something totally different? Was it easy to switch to this new system?

Please Log in to join the conversation.

Time to create page: 0.332 seconds
Powered by Kunena Forum