2+2+3 More Plasma builds, double the joy ! 3X2M and 2.5X1.5M cnc plasma build.

Is that the new hotel where I will be stopping on the next vist :woohoo:

thefabricator03 wrote:

snowgoer540 wrote: Now that’s a well lit shop! Looks great.

It could probably do with a couple more lights

Yes it could, i should have put 4 of them on each truss! Bad, bad planing !

thefabricator03 wrote: Also I like the sound system, no shop is complete without music pumping at 100 decibels.

I can not work without it, or drive, or well anything!

Clive S wrote: Is that the new hotel where I will be stopping on the next vist :woohoo:

Yup, hopefully you can fit under the gantry, the water table makes for a "thorny" bed!

thefabricator03 wrote: Looks like you will be making sparks soon Tom!

Yes and no, i sold the small red machine and it has to be done by sunday, so i have no more THACD's, even the one on that machine is borrowed from a friend whom i feel sorry for as he will have to wait for it for god knows how long.
I did ordera two months ago a smidge under 1K euro of Mesa stuff through a friend but nothing yet, most probably it will fail as all previous orders in the last 16 months ! The only Mesa stuff i got in that time period is 2 of 7i92 that a friend brought from Germany personally. I have to find a way to get them reliably, it has become a huge pain to deal with the same cr@p all the time.

tommylight wrote:

Clive S wrote: Is that the new hotel where I will be stopping on the next vist :woohoo:

Yup, hopefully you can fit under the gantry, the water table makes for a "thorny" bed!

LinuxCNC fest in Kosovo? It doesn't seem like there will be any more in Wichita as Stuart has retired and sold the shop there. Stuttgart might well happen again.

andypugh wrote: LinuxCNC fest in Kosovo?

You are all welcomed, always.

LOL, +1

LOL +1

A quick update on the current situation at the "new" shop, well not new any more it's been more than 5 months now working on it, under it, over it, around it, ......
-
This is the view from the entrance ( a sliding 3x3m door ), still looks like a total mess ...

-
This is from the other end:

-
This would be the smaller of the 2 machines at 1.2X2.5M, missing a plastic cap and side panels:

-
This is the bigger of the 2 at 1.5X3M cutting envelope:

Regards,
Tom.

So is the total mess off camera ? LOL.