2+2+3 More Plasma builds, double the joy ! 3X2M and 2.5X1.5M cnc plasma build.

Yup i did think about doing just that, but i have not belt to do both sides for now.
And the ringing was there because the belts were very loose, now they are tight as a drum, so no ringing, and no vibration.

Finally got the painted panels, so here are some pictures and a video of it running.
And yes that is laptop running on batteries, so only the network cable going to the Mesa card is attached to it. Nice as i can do the whole machine to run on batteries, but i can not do a plasma cutter to run on batteries, that would require some hefty batteries! Are you reading this, Elon???







Now waiting for the drag chain and the water table! The waiting never ends!
Tomorrow the assembly of the smaller machine begins, so more pictures and videos coming soon.
Regards,
Tom.

Had some "distractions" today, so i could not do much.

They found that as a nice arena to dance in !

Are you starting a kinder garten Toma?

Tom are they your brother's children

tecno wrote: Are you starting a kinder garten Toma?

That is a nice idea, so i might !

Clive S wrote: Tom are they your brother's children

Yes they are.
Wasted over 3 hours with them today, but that is a nice waste of time.

That would have to be the most expensive playpen in Europe! I'm disappointed they were not surfing!

rodw wrote: That would have to be the most expensive playpen in Europe! I'm disappointed they were not surfing!

That would have been fun, but, the bigger one is a bit clumsy and falls and injures herself very often and the small one still has not enough grip.
Soon.....

tommylight wrote:

rodw wrote: That would have to be the most expensive playpen in Europe! I'm disappointed they were not surfing!

That would have been fun, but, the bigger one is a bit clumsy and falls and injures herself very often and the small one still has not enough grip.
Soon.....

I thought for a moment you were referring to yourself there as the bigger one!