Linuxcnc Eggbot Happy Easter

bbsr_5a
Topic Author
Offline
Platinum Member

6 years 7 months ago #161587 by bbsr_5a

Linuxcnc Eggbot Happy Easter was created by bbsr_5a

hi its just for Fun

Attachment not found

Please Log in to join the conversation.

tommylight
Offline
Administrator

6 years 7 months ago #161591 by tommylight

Replied by tommylight on topic Linuxcnc Eggbot Happy Easter

I started building one of those 3 years ago, never finished it !
Very nice, thank you.

Please Log in to join the conversation.

bbsr_5a
Topic Author
Offline
Platinum Member

6 years 7 months ago #161595 by bbsr_5a

Replied by bbsr_5a on topic Linuxcnc Eggbot Happy Easter

Covid-19 2Days
lots of spare parts
no Homedepo open you need to have all you need in stock SEE ((24 M8)) nuts printed non in Home
the Resulucion is terible need to replace L293 by A4988

Please Log in to join the conversation.

Bari
Offline
Platinum Member
Howdy

6 years 5 months ago #169468 by Bari

Replied by Bari on topic Linuxcnc Eggbot Happy Easter

I'm doing similar with an airbrush. Are the diagonal lines a bit zigggy just due to your steps being large? The horizontal and vertical lines look very clean.
forum.linuxcnc.org/show-your-stuff/39211...cnc-5-color-airbrush

Please Log in to join the conversation.

Time to create page: 0.077 seconds