Profile for Zig

Offline
  • User Type: User
  • Rank: Junior Member Junior Member
  • Register Date: 22 Jul 2009
  • Last login: 5 years 10 months ago
  • Time Zone: UTC +0:00
  • Local Time: 09:06
  • Posts: 25
  • Profile views: 6
  • Gender: Unknown
  • Birthdate: Unknown


Zig's recent posts (25 messages )

Subject Replies / Views Last Post
Category: General LinuxCNC Questions
Topic started 8 years 6 months ago, by Zig
Last Post 8 years 6 months ago
by Todd Zuercher
Replies:5
Views:1206
Last Post by Todd Zuercher
8 years 6 months ago
Category: General LinuxCNC Questions
Topic started 8 years 6 months ago, by Zig
Last Post 8 years 6 months ago
by Todd Zuercher
Replies:5
Views:1206
Last Post by Todd Zuercher
8 years 6 months ago
Category: General LinuxCNC Questions
Topic started 8 years 7 months ago, by Zig
Last Post 8 years 7 months ago
by andypugh
Replies:3
Views:1667
Last Post by andypugh
8 years 7 months ago
Category: General LinuxCNC Questions
Topic started 8 years 7 months ago, by Zig
Last Post 8 years 7 months ago
by andypugh
Replies:3
Views:1667
Last Post by andypugh
8 years 7 months ago
Category: General LinuxCNC Questions
Topic started 9 years 7 months ago, by Zig
Last Post 9 years 7 months ago
by andypugh
Replies:5
Views:2219
Last Post by andypugh
9 years 7 months ago
Category: General LinuxCNC Questions
Topic started 9 years 7 months ago, by Zig
Last Post 9 years 7 months ago
by andypugh
Replies:5
Views:2219
Last Post by andypugh
9 years 7 months ago
Category: General LinuxCNC Questions
Topic started 9 years 7 months ago, by Zig
Last Post 9 years 7 months ago
by andypugh
Replies:5
Views:2219
Last Post by andypugh
9 years 7 months ago
Category: PnCConf Wizard
Topic started 9 years 8 months ago, by Zig
Last Post 9 years 8 months ago
by andypugh
Replies:1
Views:1799
Last Post by andypugh
9 years 8 months ago
Category: Installing LinuxCNC
Topic started 10 years 2 months ago, by Zig
Last Post 9 years 11 months ago
by Todd Zuercher
Replies:24
Views:8396
Last Post by Todd Zuercher
9 years 11 months ago
Category: CAD CAM
Topic started 16 years 7 months ago, by Bth
Last Post 10 years 1 week ago
by Zig
Replies:3
Views:15.7k
Last Post by Zig
10 years 1 week ago
Time to create page: 0.183 seconds
Powered by Kunena Forum