Profile for rubinstu

Offline

User Type: User
Rank: New Member

Register Date: 31 Jan 2025
Last login: 9 months 1 week ago
Time Zone: UTC +0:00
Local Time: 10:38

Posts: 9
Profile views: 1

Gender: Unknown
Birthdate: Unknown

rubinstu's recent posts (9 messages )

	Subject	Replies / Views	Last Post

	Z axes reference gets "forgotten" Category: General LinuxCNC Questions Topic started 9 months 1 week ago, by rubinstu Last Post 9 months 1 week ago by andypugh	Replies:1 Views:590	Last Post by andypugh 9 months 1 week ago
	Weird G54 orientation Category: General LinuxCNC Questions Topic started 1 year 3 months ago, by rubinstu Last Post 1 year 3 months ago by Aciera	Replies:4 Views:667	Last Post by Aciera 1 year 3 months ago
	Weird G54 orientation Category: General LinuxCNC Questions Topic started 1 year 3 months ago, by rubinstu Last Post 1 year 3 months ago by Aciera	Replies:4 Views:667	Last Post by Aciera 1 year 3 months ago
	Weird G54 orientation Category: General LinuxCNC Questions Topic started 1 year 3 months ago, by rubinstu Last Post 1 year 3 months ago by Aciera	Replies:4 Views:667	Last Post by Aciera 1 year 3 months ago
	HAL and INI files for Dual Y Axis, HY VFD Category: Advanced Configuration Topic started 1 year 8 months ago, by rubinstu Last Post 1 year 8 months ago by tommylight	Replies:4 Views:1240	Last Post by tommylight 1 year 8 months ago
	HAL and INI files for Dual Y Axis, HY VFD Category: Advanced Configuration Topic started 1 year 8 months ago, by rubinstu Last Post 1 year 8 months ago by tommylight	Replies:4 Views:1240	Last Post by tommylight 1 year 8 months ago
	HAL and INI files for Dual Y Axis, HY VFD Category: Advanced Configuration Topic started 1 year 8 months ago, by rubinstu Last Post 1 year 8 months ago by tommylight	Replies:4 Views:1240	Last Post by tommylight 1 year 8 months ago
	Cannot control spindle speed - HY VFD on RS-485 Category: Basic Configuration Topic started 1 year 8 months ago, by rubinstu Last Post 1 year 8 months ago by rubinstu	Replies:1 Views:904	Last Post by rubinstu 1 year 8 months ago
	Cannot control spindle speed - HY VFD on RS-485 Category: Basic Configuration Topic started 1 year 8 months ago, by rubinstu Last Post 1 year 8 months ago by rubinstu	Replies:1 Views:904	Last Post by rubinstu 1 year 8 months ago

Time to create page: 0.096 seconds

Powered by Kunena Forum