List of system parameters like #<_x> #<_y> #<_z> ???

08 May 2023 12:38 #270925 by nick.smith

List of system parameters like #<_x> #<_y> #<_z> ??? was created by nick.smith

I was digging through /subroutines yesterday and stumbled upon

#<_x> #<_y> #<_z>

which will allow you to do things like

G0 X[#<_x>/2]

Is there a full list of any more variables anywhere?

Please Log in or Create an account to join the conversation.

08 May 2023 12:50 #270926 by phillc54

Replied by phillc54 on topic List of system parameters like #<_x> #<_y> #<_z> ???

The following user(s) said Thank You: nick.smith

Please Log in or Create an account to join the conversation.

08 May 2023 12:51 #270927 by 0x2102

Replied by 0x2102 on topic List of system parameters like #<_x> #<_y> #<_z> ???

Hello,

have a look at the LinuxCNC manual:

linuxcnc.org/docs/2.8/html/gcode/overview.html#_parameters

The following user(s) said Thank You: nick.smith

Please Log in or Create an account to join the conversation.

08 May 2023 12:56 - 08 May 2023 12:58 #270928 by nick.smith

Replied by nick.smith on topic List of system parameters like #<_x> #<_y> #<_z> ???

phillc54 wrote:
There are these named parameters:
linuxcnc.org/docs/devel/html/gcode/overv...ode:named-parameters

0x2102 wrote:
Hello,

have a look at the LinuxCNC manual:

linuxcnc.org/docs/2.8/html/gcode/overview.html#_parameters

Thanks guys!

Last edit: 08 May 2023 12:58 by nick.smith.

Please Log in or Create an account to join the conversation.

15 May 2023 10:26 #271392 by gerritv

Replied by gerritv on topic List of system parameters like #<_x> #<_y> #<_z> ???

~/tmc/configs/<machinetype>/python/toplevel.py has a large list for PathPilot. Many for ATC but lots of others as well.

Please Log in or Create an account to join the conversation.

Time to create page: 0.079 seconds