Open Source Controller with internal THC

stivemaster13 wrote: Yes, maybe you're right. Although I'm hardly the first to say - guys, if you go out of style Cosa Nostra, it will bring you success!
Regarding UCCNC, I did not choose this system, it just works. It is set in graphic mode and behaves well.
Here I do not see anyone who is able to understand that LinuxCNC like any normal CPC should be set up entirely in graphical mode or as it has recently become popular (so in professional CPCs) with parameters from 1 to as needed for example 999.

thefabricator03, I'm sorry to deviate from the topic - my goal was to find out if there is already a compiled Linux CNC for small computers with a low price - Intel X5-Z8350. Nobody answered me. There are not so ordinary such computers here .
If there are, I have Chinese ones, I also ordered a Mesa 7I96 and I'm thinking of trying again to release what I haven't been able to do so far.

My friend,
There are more cheaper boards than intel x5
RPI4 is 35$

orange pi pc is 20$ and work without parallel and ethernet boards. directly through pins on boards(its cheapest) thanks to russian brother mx_master

D525 board is only 10-15$ avilable everwhere as thin clients.

For plasma fast hardware is not that much essential as in other stuff.

That's right, buddy - it's up to installation and setup and how you understand this problem.
I no longer know how to explain to you that if you sell the latest phone model, but it does not have an OS, the fact that you have uploaded to several different places on the Internet, fragments from different Android, will not help you sell any phone.
Now you will say our goal is not to sell phones. Well even if you don't want to sell them there must be another purpose right? What is the goal - a few people to take such a phone, just to prove to themselves that they can do it - to install their own Android and add whatever they want as an extra?

pinder wrote: @rodw

@thefabricator03
have you used octoprint?
how much faster is with new 32bit 3d printer boards. Does it have any opportunity in cnc?

Yeah I use Octoprint. I have only used it with a 32 bit main board so I dont have any thing to compare it with. I am sure it could be used for applications other than 3d printing. With the interface being browser based, it could open up a lot of possibilities for other CNC machines.

stivemaster13 wrote: Well even if you don't want to sell them there must be another purpose right? What is the goal - a few people to take such a phone, just to prove to themselves that they can do it - to install their own Android and add whatever they want as an extra?

The thing is, people have used LinuxCNC for commercial purposes. Look at Tormach. PathPilot is a derivative of LinuxCNC.

I got in contact with one of the developers who worked on PathPilot a while a go and asked for a price for a project I am working on. He quoted in the 100,000 USD range to get the project finished to a comparable level as another program.

I understand what you are suggesting. And unless you or someone else is prepared to spend some serious money or devote a lot of time writing software, its not going to happen.

What we have now works. Ok its not perfect but it works.

The rodw suggestion is another good one . lan cable is what people use in industry this days gor hmi
Because it’s difficult for me to understand you if you show electrical diagram its more simple for me to understand and learn too. Im looking for the safety part, the safety circuit. What im making is small compared with plasmatable.
So much information here at forum, im reading the forum backaward hahaha

stivemaster13 wrote: That's right, buddy - it's up to installation and setup and how you understand this problem.
I no longer know how to explain to you that if you sell the latest phone model, but it does not have an OS, the fact that you have uploaded to several different places on the Internet, fragments from different Android, will not help you sell any phone.
Now you will say our goal is not to sell phones. Well even if you don't want to sell them there must be another purpose right? What is the goal - a few people to take such a phone, just to prove to themselves that they can do it - to install their own Android and add whatever they want as an extra?

I know people have done a great job on cnc-club.ru
We can work out a good solution. Dont lose hope. Its communiction problem, I understand.

Start a new thread and we can work for something new.