Opencv Python camera program
- my1987toyota
-
Topic Author
- Offline
- Platinum Member
-
Less
More
- Posts: 821
- Thank you received: 334
27 Jan 2023 15:13 - 27 Jan 2023 15:17 #263011
by my1987toyota
Opencv Python camera program was created by my1987toyota
So I have been working on the PnP project this week and it is to the point of running a job.
I have made a Python program in the past using Opencv to independently spot locations
on the pcb. After some use I decided to add a center circle and hash marks to enable
more precise centering . Currently they are in 720 X 720 . Feel free to use and look the
programs over. These might be in Python 2 and may need adjusting to work in Python 3
I have made a Python program in the past using Opencv to independently spot locations
on the pcb. After some use I decided to add a center circle and hash marks to enable
more precise centering . Currently they are in 720 X 720 . Feel free to use and look the
programs over. These might be in Python 2 and may need adjusting to work in Python 3
Attachments:
Last edit: 27 Jan 2023 15:17 by my1987toyota. Reason: adding info
The following user(s) said Thank You: andypugh, tommylight, cakeslob
Please Log in or Create an account to join the conversation.
Time to create page: 0.052 seconds