Forum Menu

Probe Basic - Recent Rack ATC Implementation Example?

More
2 years 11 months ago #286407 by udoS
Replied by udoS on topic Probe Basic - Recent Rack ATC Implementation Example?
Not done yet;  Now implementing ToolLengthSensor TLC while waiting for the valves;
then implementing all of it into the EtherCAT; 

L.G.  udoS

Please Log in or Create an account to join the conversation.

More
2 years 11 months ago #286412 by CNC_ANDI
Replied by CNC_ANDI on topic Probe Basic - Recent Rack ATC Implementation Example?
why implementing tool length? you have a atc spindel with holders.... i measure my tools only once when i put a new tool in the toolholder...

Please Log in or Create an account to join the conversation.

More
2 years 11 months ago - 2 years 11 months ago #286443 by udoS
Replied by udoS on topic Probe Basic - Recent Rack ATC Implementation Example?
@CNC_ANDI

why implementing tool length? you have a atc spindel with holders.... i measure my tools only once when i put a new tool in the toolholder...
because there are more then just 5 tools;

L.G.  udoS


 
Last edit: 2 years 11 months ago by udoS.

Please Log in or Create an account to join the conversation.

More
2 years 11 months ago #286462 by CNC_ANDI
Replied by CNC_ANDI on topic Probe Basic - Recent Rack ATC Implementation Example?
I have a lot of more than 5 Tools. you need only more Holder ;)

The following user(s) said Thank You: Clive S

Please Log in or Create an account to join the conversation.

More
2 years 11 months ago #286552 by udoS
Replied by udoS on topic Probe Basic - Recent Rack ATC Implementation Example?
That's not a rack I guess
So here you have it; Probe-Basic ..
ATC Rack 5 Positions ToolLengthSensor;


L.G.  udoS

Please Log in or Create an account to join the conversation.

More
2 years 11 months ago #286793 by Lcvette
Replied by Lcvette on topic Probe Basic - Recent Rack ATC Implementation Example?
looking good! are you still running ethercat? how are you liking it?

Please Log in or Create an account to join the conversation.

Moderators: KCJ, Lcvette
Time to create page: 0.386 seconds
Powered by Kunena Forum