Interface localization into Ukrainian
- Omelinet
- Offline
- New Member
-
Less
More
- Posts: 1
- Thank you received: 0
26 Apr 2026 09:03 #345936
by Omelinet
Interface localization into Ukrainian was created by Omelinet
Hello everyone, I'm new here.
I have a problem, I got a machine that has linuxcnc and Probe Basic
I tried to translate myself using QT Designer, but I was only able to do it for a few points. When I started translating more, my Probe Basic stopped running.
Maybe someone can tell me which files need to be translated. Because I even edited the .PY file but my Probe Basic still started in English.
P.S. If there is already a link to a forum or discussion, I would be grateful if you could direct me. Thanks
I have a problem, I got a machine that has linuxcnc and Probe Basic
I tried to translate myself using QT Designer, but I was only able to do it for a few points. When I started translating more, my Probe Basic stopped running.
Maybe someone can tell me which files need to be translated. Because I even edited the .PY file but my Probe Basic still started in English.
P.S. If there is already a link to a forum or discussion, I would be grateful if you could direct me. Thanks
Please Log in or Create an account to join the conversation.
- tommylight
-
- Away
- Moderator
-
Less
More
- Posts: 21568
- Thank you received: 7355
16 May 2026 14:58 #346440
by tommylight
Replied by tommylight on topic Interface localization into Ukrainian
Moved to "QtPyVCP" section.
Please Log in or Create an account to join the conversation.
Moderators: KCJ, Lcvette
Time to create page: 0.559 seconds