Cincinnati 10HC2500 ATC with custom HAL component

terkaa
Offline
Elite Member

22 Jun 2016 07:57 #76398 by terkaa

Cincinnati 10HC2500 ATC with custom HAL component was created by terkaa

Hi,

Here is a short and hasty video of ATC on Cincinnati 10HC2500 I am working on. This is made with custom HAL components ARMATC + PIN_ORIENT also Andys CAROUSEL component is used here for tool magazine. I still have few things to work out but it is mostly working now.

Tero

Please Log in or Create an account to join the conversation.

andypugh
Offline
Moderator

22 Jun 2016 08:01 #76400 by andypugh

Replied by andypugh on topic Cincinnati 10HC2500 ATC with custom HAL component

Good to see it move.

Please Log in or Create an account to join the conversation.

terkaa
Offline
Elite Member

22 Jun 2016 13:22 #76423 by terkaa

Replied by terkaa on topic Cincinnati 10HC2500 ATC with custom HAL component

Thank you for pointing me to right direction many times.

Tero

Please Log in or Create an account to join the conversation.

terkaa
Offline
Elite Member

23 Jun 2016 11:17 #76485 by terkaa

Replied by terkaa on topic Cincinnati 10HC2500 ATC with custom HAL component

Ok, Finished.

Tero

Please Log in or Create an account to join the conversation.

terkaa
Offline
Elite Member

29 Aug 2016 09:18 #79637 by terkaa

Replied by terkaa on topic Cincinnati 10HC2500 ATC with custom HAL component

Now added Y-axis movement and first runs in Auto mode. Still have to order & install Fagor scales for X and Z axes.

Tero

Please Log in or Create an account to join the conversation.

tommylight
Away
Moderator

29 Aug 2016 12:16 #79645 by tommylight

Replied by tommylight on topic Cincinnati 10HC2500 ATC with custom HAL component

Nice!

Please Log in or Create an account to join the conversation.

terkaa
Offline
Elite Member

21 Sep 2016 05:31 #80709 by terkaa

Replied by terkaa on topic Cincinnati 10HC2500 ATC with custom HAL component

Video of first tryouts G84 tapping with floating holder:

Tero

Please Log in or Create an account to join the conversation.

terkaa
Offline
Elite Member

14 Oct 2016 12:47 #81641 by terkaa

Replied by terkaa on topic Cincinnati 10HC2500 ATC with custom HAL component

Ok,

Now we have missing linear scales from Fagor. Still lot of servo tuning to do and bunch of other small stuff....

Tero

Please Log in or Create an account to join the conversation.

terkaa
Offline
Elite Member

20 Oct 2016 09:06 - 20 Oct 2016 09:07 #81884 by terkaa

Replied by terkaa on topic Cincinnati 10HC2500 ATC with custom HAL component

Ok, first actual part is now machined. It is a operator cabin base plate for mining trucks. It did use G84 floating tapping cycle and it does work very well.

Tero

Last edit: 20 Oct 2016 09:07 by terkaa.

Please Log in or Create an account to join the conversation.

terkaa
Offline
Elite Member

20 Oct 2016 09:22 #81885 by terkaa

Replied by terkaa on topic Cincinnati 10HC2500 ATC with custom HAL component

One from electic cabinet also.

Tero

Please Log in or Create an account to join the conversation.

Time to create page: 0.078 seconds