First conversion, Axiom CNC Router with RichAuto controls
- ehaskins
- Offline
- New Member
-
Less
More
- Posts: 1
- Thank you received: 1
26 Jan 2026 18:25 - 28 Jan 2026 03:23 #341965
by ehaskins
First conversion, Axiom CNC Router with RichAuto controls was created by ehaskins
I just "finished" converting an Axiom AR8 Elite from RichAuto controls to LinuxCNC. I have quite a few details left to tidy up, but it's working.
Configuration and wiring notes are on GitHub , and I made a YouTube video out of the project.
I'd appreciate anyone pointing out stupid mistakes I made.
Configuration and wiring notes are on GitHub , and I made a YouTube video out of the project.
I'd appreciate anyone pointing out stupid mistakes I made.
Last edit: 28 Jan 2026 03:23 by ehaskins. Reason: Fix link to YouTube video
The following user(s) said Thank You: rodw
Please Log in or Create an account to join the conversation.
- tommylight
-
- Away
- Moderator
-
Less
More
- Posts: 21282
- Thank you received: 7266
31 Jan 2026 03:14 - 31 Jan 2026 03:39 #342234
by tommylight
Replied by tommylight on topic First conversion, Axiom CNC Router with RichAuto controls
Sorry i had no time to watch this, will do very soon.
Thank you.
OK, watched it, left a comment, nicely done and very detailed.
Thank you.
OK, watched it, left a comment, nicely done and very detailed.
Last edit: 31 Jan 2026 03:39 by tommylight. Reason: more info
Please Log in or Create an account to join the conversation.
Time to create page: 0.251 seconds