Need clean subroutine like on industrial controls

2 years 9 months ago #290378 by Aciera

Replied by Aciera on topic Need clean subroutine like on industrial controls

Yea, I'm not sure where your problem is but I just went through the trouble of running my code above on my mill and it worked just fine. As expected.

Please Log in or Create an account to join the conversation.

2 years 9 months ago - 2 years 9 months ago #290379 by Mecanix

Replied by Mecanix on topic Need clean subroutine like on industrial controls

Unlike other silly mach3/industrialwhatever you can gcode this until the end-of-worlds using countless ways & logic with lcnc. It's good stuff.

e.g.

Code:

while (universe != blackhole):
    self.c.mdi("G91")
    self.c.mdi("G1 Z-1.")
    self.c.mdi("G4 P0.3")
    self.c.mdi("G90")

Last edit: 2 years 9 months ago by Mecanix.

Please Log in or Create an account to join the conversation.

Time to create page: 0.066 seconds