Is this similar to 3D printing bed mesh?There is something like that done here, one for circuit boards, the other for printers.Sorry, no time to find those.Edit:search google with something likebed leveling site:linuxcnc.orgorbed compensation site:linuxcnc.orgThis shows results only from this forum and LinuxCNC website and wiki.
I used an autoleveller quite alot for PCB engraving before i found out that JLCPCB and the like are costing almost nothing.
www.autoleveller.co.uk/It
changes the Gcode file to first probe in a grid, saving those values as variable accessible to gcode. then offsets the Z by that amount at the correct coordinates.Attached is a sample file from the website modified by the app.
