Data transfer LinuxCNC to / from custom board - Solved

You can jog without homing if add jogging, enable & counts for each joint.

This is like a century ago I forgot but was it in the naming of the nets that defines whether you can jog with and/or without homing?

axis.x.jog-enable -vs- axis.joint0.jog-enable

An HAL expert would know...

axis is for jogging an axis, which needs to be homed.
joint is for jogging a joint which doesn't need to be homed.

I think these were some of the major changes from 2.8.xx to 2.9.xx

The correct names joint.xx.count, joint.xx.enable and so forth. Open axis and look at the hal configuration menu.

Cant do this anymore bye all wrote:

The correct names joint.xx.count, joint.xx.enable and so forth. Open axis and look at the hal configuration menu.

I personally would never, under no circumstance, ever attempt jogging an un-homed machine-tool (again). Don't ask me why's that, too shy to explain. Great info none the less. Suspected it was something related to the net/name or something.