Need help making rotary axis behave like second spindle

BINGO, adding the halui line did the trick. Thank you PCW and spumco, you guys are amazing (and lighting fast responders).

theslawek wrote:

BINGO, adding the halui line did the trick. Thank you PCW and spumco, you guys are amazing (and lighting fast responders).
 

Thanks for reporting back, and glad to hear it's sorted out.

BTW, the "=>" and "<=" in the line are just characters to help the user visualize the pin to signal connection.  They are not required, and are ignored by LCNC.  I personally find single-line HAL entries nearly impossible to read, but breaking them up in to multiple lines does make for a much longer HAL file.

For example, the single line:
net machine-is-on hm2_7i76e.0.stepgen.04.enable halui.machine.is-on

is the same to LCNC as:
net machine-is-on  <= halui.machine.is-on
net machine-is-on  => hm2_7i76e.0.stepgen.04.enable

And also note that you can split the HAL entries between files, too, if you use a common signal name. (eg all main HAL signals are available in the postgui halfile)