Loosing steps running long program

30 Mar 2019 16:33 #129978 by pl7i92
We made most best Fast Precision things on
Timiingbelt system as the ACC is way higher then direct drive
with lower Costs on stepper and electronics

with Ballscrew xx05 its 5mm/rev at timingbelt 20/25 Motor/Screw it is 0,01mm per Step at Halfstepping 400/rev stepperDriver
can be easy get to more precision 800steps/rev Driver stepping to 0,005
BEST Speed Acc and Torge at lowest Cost 4Nm Steppers and <50V Safty Voltige at min Amps <4A Nema 23

Please Log in or Create an account to join the conversation.

Moderators: piasdom
Time to create page: 0.071 seconds
Powered by Kunena Forum