Forum Menu

Forum Header

Stepgeneration 2.6.6 vs 2.8.0

More
11 years 8 months ago #56256 by skunkworks
Replied by skunkworks on topic Stepgeneration 2.6.6 vs 2.8.0
It looks like stepconf has stopped inserting the

setp parport.0.pin-02-out-reset 1
setp parport.0.pin-04-out-reset 1
setp parport.0.pin-06-out-reset 1

lines. (everything else seems to be there...)

sam
The following user(s) said Thank You: mmprestine

Please Log in or Create an account to join the conversation.

More
11 years 8 months ago #56257 by mmprestine
Replied by mmprestine on topic Stepgeneration 2.6.6 vs 2.8.0
Yes you are correct! I was narrow minded and was only looking at the start of the file for, port config. I also see that probe_parport is no longer there also. Any idea on that file?

Matt

Please Log in or Create an account to join the conversation.

More
11 years 8 months ago #56258 by skunkworks
Replied by skunkworks on topic Stepgeneration 2.6.6 vs 2.8.0
probe_parport has been removed. (not needed) and could be the reason why your 2.6 config doesn't run in 2.8..

mmprestine wrote: Yes you are correct! I was narrow minded and was only looking at the start of the file for, port config. I also see that probe_parport is no longer there also. Any idea on that file?

Matt

Please Log in or Create an account to join the conversation.

More
11 years 8 months ago #56259 by mmprestine
Replied by mmprestine on topic Stepgeneration 2.6.6 vs 2.8.0
I tested the additions and everything works as expected. Thanks for all the help.
Matt

Please Log in or Create an account to join the conversation.

More
11 years 8 months ago #56286 by cmorley
Replied by cmorley on topic Stepgeneration 2.6.6 vs 2.8.0
I pushed a fix for this...Thanks for the bug report.
Please check again..after the fixes are available.

Chris M

Please Log in or Create an account to join the conversation.

More
11 years 2 weeks ago #63831 by Niko
Replied by Niko on topic Stepgeneration 2.6.6 vs 2.8.0
Probably not the best place to ask but will there be features in 2.8 trajectory planner to support reversing ?
I'm asking this regarding multi axis EDM machines .

Please Log in or Create an account to join the conversation.

Time to create page: 0.077 seconds
Powered by Kunena Forum