×
Forum Header
Plasma set up
05 Jul 2020 13:00 #173666
by vk7dy
Plasma set up was created by vk7dy
Hi to all , i am about to set up a plasma torch to my cnc table,..how do i set the cnc software to run ir, eg trigger the torch..
i have a router table working fine but now need some help with setting the config to run a plasma torch..
thanks Ken
Tasmania , Australia.
i have a router table working fine but now need some help with setting the config to run a plasma torch..
thanks Ken
Tasmania , Australia.
Please Log in or Create an account to join the conversation.
05 Jul 2020 14:28 #173671
by Clive S
Have you seen this. linuxcnc.org/docs/2.8/html/plasma/plasmac-user-guide.html
and ;- linuxcnc.org/docs/2.8/html/plasma/plasma-cnc-primer.html
Replied by Clive S on topic Plasma set up
Hi to all , i am about to set up a plasma torch to my cnc table,..how do i set the cnc software to run ir, eg trigger the torch..
i have a router table working fine but now need some help with setting the config to run a plasma torch..
thanks Ken
Tasmania , Australia.
Have you seen this. linuxcnc.org/docs/2.8/html/plasma/plasmac-user-guide.html
and ;- linuxcnc.org/docs/2.8/html/plasma/plasma-cnc-primer.html
Please Log in or Create an account to join the conversation.
Time to create page: 0.060 seconds