Regarding ARM Processor based board
- 3kamalakkannan
- Offline
- New Member
-
Less
More
- Posts: 3
- Thank you received: 1
04 Mar 2013 16:15 #30822
by 3kamalakkannan
Regarding ARM Processor based board was created by 3kamalakkannan
Hi friends,
If anyone know about ARM Processor based board to install ubuntu 10.04 emc/linuxcnc ?
If anyone know about ARM Processor based board to install ubuntu 10.04 emc/linuxcnc ?
Please Log in or Create an account to join the conversation.
04 Mar 2013 22:00 #30837
by andypugh
Some people have LinuxCNC running on the BeagleBone.
This uses Xenomai rather than RTAI, and is currently experimental.
wiki.linuxcnc.org/cgi-bin/wiki.pl?Debian...agleBone_ARM_Install
Replied by andypugh on topic Regarding ARM Processor based board
Hi friends,
If anyone know about ARM Processor based board to install ubuntu 10.04 emc/linuxcnc ?
Some people have LinuxCNC running on the BeagleBone.
This uses Xenomai rather than RTAI, and is currently experimental.
wiki.linuxcnc.org/cgi-bin/wiki.pl?Debian...agleBone_ARM_Install
Please Log in or Create an account to join the conversation.
Time to create page: 0.135 seconds