Preemptive RT on Jessie or Stretch?

I recently installed 4.16.8 on Stretch using this script file: paste.debian.net/1026684/
Turns out on a J1900 it's much worse than the 4.9 preempt packaged with stretch, YMMV.

Have the IPC, and will be installing OS and LinuxCNC this coming week.

So, since last asking in May, has anybody else gotten Jessie/Stretch working?

Hoping to go vanilla with the Debian install, to make ongoing management and updating easier. As mentioned, need Jessie or Stretch as the HDMI graphics drivers (can’t recall chipset but newer than Wheezy) don’t work (can’t detect the display or map the correct screen size/resolution). I can get the touchscreen working, but it of course doesn’t map with the GUI, and the desktop even scrolls when you go toward the bottom or sides! Really need Jessie or higher on the hardware.

Try this

mesaus.com/info/debian-9-uspace.txt

Thanks to JT here's an alternate method to get preempt rt on stretch

paste.ubuntu.com/p/jvDN76Pq7Z/

tlightus wrote: Thanks to JT here's an alternate method to get preempt rt on stretch

paste.ubuntu.com/p/jvDN76Pq7Z/

Yeah that's an abridged version of the one I linked to.

If you aren't averse to Linux Mint, the following link has some info on installing LCNC uspace on Mint-18.3

forum.linuxcnc.org/18-computer/34823-a-f...d-up?start=30#113557

A few posts down is a link to my google drive with the kernel & uspace packages.
forum.linuxcnc.org/18-computer/34823-a-f...d-up?start=30#113597