Lenovo thinkcentre M700 tiny pc
08 Feb 2021 22:22 #198089
by Markyd
Lenovo thinkcentre M700 tiny pc was created by Markyd
Will one of these be signifantly better thean a raspberry pi 4 for linux CNC running a 7i96/7i85 combo driving nema 34 steppers on a 3 axis mill (Harrison vertical) over ethernet. They seem to sell for about £150-170 vs the rpi4 that I already own.
Thinkcentre M700
Intel Core i5 6500t 2.5Ghz True Quad Core Processor
8GB Memory
256GB SSD Drive
Intel HD 530 Graphics
Several USB 3.0 ports,
DisplayPort,
Gigabit LAN
Thinkcentre M700
Intel Core i5 6500t 2.5Ghz True Quad Core Processor
8GB Memory
256GB SSD Drive
Intel HD 530 Graphics
Several USB 3.0 ports,
DisplayPort,
Gigabit LAN
Please Log in or Create an account to join the conversation.
09 Feb 2021 23:05 #198217
by andypugh
Replied by andypugh on topic Lenovo thinkcentre M700 tiny pc
Yes, it probably is better.
I have foundry patterns for converting a Harrison to CNC, if that is any help?
goo.gl/photos/ucQDkdbmcp3XhuAU6
I have foundry patterns for converting a Harrison to CNC, if that is any help?
goo.gl/photos/ucQDkdbmcp3XhuAU6
Please Log in or Create an account to join the conversation.
13 Feb 2021 19:00 #198703
by Markyd
Replied by Markyd on topic Lenovo thinkcentre M700 tiny pc
Andy, thanks. We spoke a while ago and you were kind enough to offer then. I've cobbled something together but its not as neat/OEM looking as yours. I posted a build thread over on mig-welding.co.uk.
Please Log in or Create an account to join the conversation.
Time to create page: 0.069 seconds