Trouble with LinuxCNC and Gantry stepper motor setup.

1 year 3 months ago #332184 by PCW

Replied by PCW on topic Trouble with LinuxCNC and Gantry stepper motor setup.

You do not absolutely need to have switches on a gantry
but if not, you need to use an "immediate" homing setup:

linuxcnc.org/docs/html/config/ini-homing.html#_immediate_homing

The following user(s) said Thank You: Revinvoss

Please Log in or Create an account to join the conversation.

Time to create page: 0.039 seconds