Linux based all in one anyone see whats under the hood yet?

Start
Prev
1
Next
End

Cncninja
Offline
Premium Member

09 Aug 2025 17:03 #333132 by Cncninja

Linux based all in one anyone see whats under the hood yet? was created by Cncninja

I came across this Linux based all in one cnc controller, and it's cheap. I wonder what's under the hood software wise, anyone seen it yet ?

www.aliexpress.us/item/3256809291737025....pt=glo2usa4itemAdapt

Please Log in or Create an account to join the conversation.

tommylight
Away
Moderator

09 Aug 2025 17:11 #333133 by tommylight

Replied by tommylight on topic Linux based all in one anyone see whats under the hood yet?

I would not bother with it, especially after i have removed several and replaced with a normal PC and LinuxCNC.

Please Log in or Create an account to join the conversation.

Cncninja
Offline
Premium Member

09 Aug 2025 17:38 #333135 by Cncninja

Replied by Cncninja on topic Linux based all in one anyone see whats under the hood yet?

Agree, most are running a proprietary embedded system, but this one is an ARM-based Linux system with 3d gpu. I wonder if it's a port of LinuxCNC and or we can mod it

Please Log in or Create an account to join the conversation.

ihavenofish
Offline
Platinum Member

10 Aug 2025 00:32 #333140 by ihavenofish

Replied by ihavenofish on topic Linux based all in one anyone see whats under the hood yet?

Most of these little ones are linux. They are "ok", but most are pretty limited in features and performance.

I have a DDCSV3.1 and its cool to have an all in one single box, but it doesn't come close to linuxcnc. Contouring motion is very poor and its limited to 250khz pulse rates.

Please Log in or Create an account to join the conversation.

rodw
Offline
Platinum Member

10 Aug 2025 12:38 #333154 by rodw

Replied by rodw on topic Linux based all in one anyone see whats under the hood yet?

Linux 5.6 is a very old kernel. we are now up to 6.12 and Debian Bookworm had advanced to 6.1.37 before being replaced by Trixie yesterday

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.116 seconds