Micron units in G-Code

jpka wrote:

So i currently gathering all needed information, especially about how to (easy) integrate my program as a filter in Axis's 'open' menu and then how to auto-transfer generated .ngc file to it...

Look at the Simple G Code Generators on the Wiki and find the line that tests for the existence of the Axis gui.

IN_AXIS = os.environ.has_key("AXIS_PROGRESS_BAR")

and

if IN_AXIS:
self.quitButton = Button(self, text='Write to AXIS and Quit',\
command=self.WriteToAxis)

and

def WriteToAxis(self):
sys.stdout.write(self.g_code.get(0.0, END))



wiki.linuxcnc.org/uploads/arcbuddy.py

John

I just done the real production tests of program, and it looks ready to use. I prepare tarball with C code and two testcase files. Program written in C with optional GTK support. Program conforms with KISS rule (i hope).
If the program can be useful, lets discuss it, but probably in new topic, current is quite old.
I will be happy to see actual results of program using.
For more info, please look at C source file.

I just done the real production tests of program, and it looks ready to use. I prepare tarball with C code and two testcase files. Program written in C with optional GTK support. Program conforms with KISS rule (i hope).
If the program can be useful, lets discuss it, but probably in new topic, current is quite old.
I will be happy to see actual results of program using.
For more info, please look at C source file.

OOPS please delete the duplicate. Sorry

The file lost, try to re-posting:

gerb2ngc.tar.bz2

(file again lost, i will send via email when somebody need it)

bz2 is not an approved extension. I think .tar or .zip and a few others work. Check the using this forum for the complete list.

John