Mill G code Generator

More
13 years 1 month ago #39157 by BigJohnT
Replied by BigJohnT on topic Mill G code Generator
more



Note: tapping is not done so it does not show up yet.

JT
Attachments:
The following user(s) said Thank You: Mike_Eitel

Please Log in or Create an account to join the conversation.

More
13 years 1 month ago #39159 by Rick G
Replied by Rick G on topic Mill G code Generator
Morning John,

Following the link from 1st post and ended up with version .5

Rick G

Please Log in or Create an account to join the conversation.

More
13 years 1 month ago #39160 by BigJohnT
Replied by BigJohnT on topic Mill G code Generator
Opps, my apology wrong link.

JT

Please Log in or Create an account to join the conversation.

More
13 years 1 month ago #39161 by BigJohnT
Replied by BigJohnT on topic Mill G code Generator
I did some arranging on the Hole Ops tab if anyone looks at this let me know if you think the Spot section is clear and has everything needed.

JT

Please Log in or Create an account to join the conversation.

More
13 years 1 month ago #39176 by BigJohnT
Replied by BigJohnT on topic Mill G code Generator
0.9.3

Everything is done except for the rigid tapping

JT

Please Log in or Create an account to join the conversation.

More
13 years 1 month ago #39220 by BigJohnT
Replied by BigJohnT on topic Mill G code Generator
Version 1.0 is the latest.

All the hole making ops should be functional. I've not tried any yet but will do so today. If anyone else could test this out it would help.

Thanks
JT

Please Log in or Create an account to join the conversation.

Time to create page: 0.268 seconds
Powered by Kunena Forum