Need a HELP on G-Code

BigJohnT
Offline
Administrator

10 years 5 months ago #74875 by BigJohnT

Replied by BigJohnT on topic Need a HELP on G-Code

From the first few lines of train.py

"""Usage:
python train.py

train.py does not take any arguments.

JT

Please Log in or Create an account to join the conversation.

jstoquica
Offline
Premium Member

10 years 5 months ago #74883 by jstoquica

Replied by jstoquica on topic Need a HELP on G-Code

Hi John,

Thanks for the reply.

Then, How can I see or generate the output file of that script?

Code:

h = hal.component("train")
h.newpin ("record", hal.HAL_BIT, hal.HAL_IN)

outfile = "train.ngc"

h.ready()

try:
    while 1:
	if h["record"] == 1:
	    f = open(outfile, 'a')
	    pos = get_cart()
	    f.write(pos)
	    f.close()

Thanks.

Please Log in or Create an account to join the conversation.

thefabricator03
Visitor

7 years 1 month ago #145311 by thefabricator03

Replied by thefabricator03 on topic Need a HELP on G-Code

SKH,

This might be a long shot since this thread is thee years old but do you have any more pictures of you robotic arm? It is a very interesting design.

Please Log in or Create an account to join the conversation.

Time to create page: 0.584 seconds