[closed] FreeCAD path, strange movement in Z axis

Aciera
Offline
Administrator

5 years 6 months ago #204882 by Aciera

Replied by Aciera on topic FreeCAD path, strange movement in Z axis

Can we see what you've got in your tooltable?

Please Log in or Create an account to join the conversation.

ikkuh
Offline
Elite Member

5 years 6 months ago - 5 years 6 months ago #204887 by ikkuh

Replied by ikkuh on topic FreeCAD path, strange movement in Z axis

Aciera wrote: Can we see what you've got in your tooltable?

Code:

cat tool.tbl
T0   P0   ;
T1   P0   Z+41.690621 ;flat003

That was after removing the *.var files and setting G54 to new corner and starting LinuixCNC. After running the first program gmoccapy added the toollength offset as seen above.

Last edit: 5 years 6 months ago by ikkuh.

Please Log in or Create an account to join the conversation.

ikkuh
Offline
Elite Member

5 years 6 months ago #205133 by ikkuh

Replied by ikkuh on topic [closed] FreeCAD path, strange movement in Z axis

I reinstalled the computer. It seems to work now.
Thanks to everybody who tried to help.

Please Log in or Create an account to join the conversation.

Time to create page: 2.565 seconds