How to input data (a number) from operator?
- Karen
- Offline
- New Member
-
Less
More
- Posts: 2
- Thank you received: 0
31 Mar 2024 15:11 #297285
by Karen
How to input data (a number) from operator? was created by Karen
Please, give me advice: which commands permit to ask operator to input a number to a variable?
(for example, the operator measures manually a size of smth and I want to get this size and to use it in running program).
For output there are (MSG,) and (PRINT,).
And how to input smth?
(for example, the operator measures manually a size of smth and I want to get this size and to use it in running program).
For output there are (MSG,) and (PRINT,).
And how to input smth?
Please Log in or Create an account to join the conversation.
- Aciera
-
- Offline
- Administrator
-
Less
More
- Posts: 3958
- Thank you received: 1714
31 Mar 2024 15:18 #297287
by Aciera
Replied by Aciera on topic How to input data (a number) from operator?
Have a look here forum.linuxcnc.org/38-general-linuxcnc-q...iable?start=10#57149
Should still work.
Should still work.
Please Log in or Create an account to join the conversation.
- Karen
- Offline
- New Member
-
Less
More
- Posts: 2
- Thank you received: 0
31 Mar 2024 15:23 #297288
by Karen
Replied by Karen on topic How to input data (a number) from operator?
OK, Thanks, I'll try.
So strange that there is no simple especial command for this easy useful action.
So strange that there is no simple especial command for this easy useful action.
Please Log in or Create an account to join the conversation.
Time to create page: 0.067 seconds