ASSE Y
- thor1966
- Offline
- New Member
-
Less
More
- Posts: 5
- Thank you received: 0
12 Aug 2011 10:21 #12449
by thor1966
ASSE Y was created by thor1966
because the Y axis runs only in clockwise direction, even if the control counter-clockwise?
Please, help me!
Please, help me!
Please Log in or Create an account to join the conversation.
- Rick G
-
- Offline
- Junior Member
-
Less
More
- Posts: 28
- Thank you received: 156
12 Aug 2011 11:13 #12452
by Rick G
Replied by Rick G on topic Re:ASSE Y
Going to need more information.
However if it is a stepper system make sure the Y direction signal is properly configured on the right pin and properly wired in the driver / break out board.
Rick G
However if it is a stepper system make sure the Y direction signal is properly configured on the right pin and properly wired in the driver / break out board.
Rick G
Please Log in or Create an account to join the conversation.
Time to create page: 0.055 seconds