Auto z axis touch off
Please Log in or Create an account to join the conversation.
Also tool station probe.
I am at the wrong machine right now but I can send you links later.
Rick G
Please Log in or Create an account to join the conversation.
I have seen some posting on the internet that refer to auto touch off on the z axis, but I don't see any way of doing it in axis. Is it possible to auto touch off and if so what does it take to auto touch off an axis ?
To do it completely automatically (ie on every M6 with no extra code) requires re-mapping of the M6 command, and is only supported in the development branch (2.6).
www.linuxcnc.org/docview/devel/html/remap/structure.html
Please Log in or Create an account to join the conversation.
softsolder.com/2010/04/14/emc2-ugliest-t...-probe-station-ever/
You can also use a probe to find both x and y.
Rick G
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
wiki.linuxcnc.org/cgi-bin/wiki.pl?Classi...utton_probe_touchoff
What version of linuxcnc are you using?
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
I know for sure the one button Auto zero touch off works on V2.4.3 ubuntu 10.04LTS
Which button in Axis does this? I'm not familiar with that one...
John
Please Log in or Create an account to join the conversation.
I have seen some posting on the internet that refer to auto touch off on the z axis, but I don't see any way of doing it in axis. Is it possible to auto touch off and if so what does it take to auto touch off an axis ?
Can you explain what you want to do exactly? I have a subroutine for auto touch off for Z on my plasma...
John
Please Log in or Create an account to join the conversation.