Auto z axis touch off
14 Feb 2012 14:47 #17664
by KenC
Replied by KenC on topic Re:Auto z axis touch off
BigJohnT, There are no button in the EMC2 raw package, The instruction to set up the button is all here
wiki.linuxcnc.org/cgi-bin/wiki.pl?Classi...utton_probe_touchoff
wiki.linuxcnc.org/cgi-bin/wiki.pl?Classi...utton_probe_touchoff
Please Log in or Create an account to join the conversation.
15 Feb 2012 11:59 #17681
by BigJohnT
Replied by BigJohnT on topic Re:Auto z axis touch off
Ok, I was wondering what was up.
John
John
Please Log in or Create an account to join the conversation.
15 Feb 2012 12:11 - 15 Feb 2012 12:13 #17682
by KenC
Replied by KenC on topic Re:Auto z axis touch off
OK
PS I some how get error massage when I was trying to post reply in the G-code thread which I started. but it work just fine here .
PS I some how get error massage when I was trying to post reply in the G-code thread which I started. but it work just fine here .
Last edit: 15 Feb 2012 12:13 by KenC.
Please Log in or Create an account to join the conversation.
Time to create page: 0.084 seconds