Axis window maximized on opening?
- mmt
- Offline
- Premium Member
-
Less
More
- Posts: 124
- Thank you received: 2
07 May 2012 15:21 #19903
by mmt
Axis window maximized on opening? was created by mmt
Is there a way to do this?
Please Log in or Create an account to join the conversation.
- ArcEye
- Offline
- Junior Member
-
Less
More
- Posts: 25
- Thank you received: 761
07 May 2012 16:36 - 07 May 2012 16:42 #19905
by ArcEye
Replied by ArcEye on topic Re:Axis window maximized on opening?
Hi
A search of the forum for 'axis full screen' returns
www.linuxcnc.org/index.php/english/compo...&id=320&catid=21#320
www.linuxcnc.org/index.php/english/compo...atid=38&id=3567#3569
www.linuxcnc.org/index.php/english/compo...=10&id=10292&start=6
regards
PS
I you spell maximised incorrectly (like the Americans do!) you get shed loads more links
www.linuxcnc.org/index.php/english/compo...id=49&id=17021#17022
for example
A search of the forum for 'axis full screen' returns
www.linuxcnc.org/index.php/english/compo...&id=320&catid=21#320
www.linuxcnc.org/index.php/english/compo...atid=38&id=3567#3569
www.linuxcnc.org/index.php/english/compo...=10&id=10292&start=6
regards
PS
I you spell maximised incorrectly (like the Americans do!) you get shed loads more links
www.linuxcnc.org/index.php/english/compo...id=49&id=17021#17022
for example
Last edit: 07 May 2012 16:42 by ArcEye.
Please Log in or Create an account to join the conversation.
- BigJohnT
-
- Offline
- Administrator
-
Less
More
- Posts: 7106
- Thank you received: 1177
07 May 2012 16:51 #19907
by BigJohnT
Replied by BigJohnT on topic Re:Axis window maximized on opening?
Well the FAQ in this section covers several ways to adjust the screen when Axis loads...
John
John
Please Log in or Create an account to join the conversation.
Time to create page: 0.100 seconds