[solved]axis error 230 ??

Start
Prev
1
Next
End

bkt
Topic Author
Offline
Platinum Member

14 Jan 2017 14:30 - 19 Jan 2017 15:56 #85752 by bkt

[solved]axis error 230 ?? was created by bkt

these error appear when in halui.mdi.mode state (halui.is-mdi active) an MDI command launched halui.mdi.0-command ends ..... (These command is a subroutine NGC declared in the .ini file halui section as MDI = O <mysoub> CALL ....)

the error is similar to these (not have the machine in front of me):

EMC_TELEOP_SET_ENABLED error 230 try to enable telop from MDI

or similar ... the error code is 230 and really not set the teleop during mdi execution .... is normal or must find the problem with halscope??

regards
Giorgio

Last edit: 19 Jan 2017 15:56 by bkt.

Please Log in or Create an account to join the conversation.

bkt
Topic Author
Offline
Platinum Member

19 Jan 2017 15:56 #86160 by bkt

Replied by bkt on topic [solved]axis error 230 ??

wrong sequence of command.....

regards
Miki

Please Log in or Create an account to join the conversation.

tommylight
Away
Moderator

19 Jan 2017 17:35 #86174 by tommylight

Replied by tommylight on topic [solved]axis error 230 ??

k-1 wrote:
wrong sequence of command.....

regards
Miki <======?????????

You changed your name ????

The following user(s) said Thank You: bkt

Please Log in or Create an account to join the conversation.

bkt
Topic Author
Offline
Platinum Member

26 Jan 2017 17:59 #86724 by bkt

Replied by bkt on topic [solved]axis error 230 ??

Miki or Big Miki is my nikname ....I gave him my business friends .... a bit 'for the look a bit' for the way we do at times

... so in some other forum my sign is miki ...

Hello tommylight... have a good night ...

mine is good I have finally ubuntu kernel 4.8.15 working with quite good servo thread latency ....

Regards
Giorgio/Miki

The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.056 seconds