Adding DRO to new tab in axis
29 Mar 2017 19:16 #90519
by mmt
Adding DRO to new tab in axis was created by mmt
I have a Live Video tab that I created in AXIS and I need to add a DRO to the tab. (overlayed onto the video)
I saw where to do this a few years ago but not I cannot find it anywhere.
can someone point me in the right direction please?
I saw where to do this a few years ago but not I cannot find it anywhere.
can someone point me in the right direction please?
Please Log in or Create an account to join the conversation.
30 Mar 2017 15:04 #90568
by andypugh
Replied by andypugh on topic Adding DRO to new tab in axis
Is the live video tab a GladeVCP entity? If it is then you should be able to edit in Glade to add a hal_dro widget.
Please Log in or Create an account to join the conversation.
30 Mar 2017 15:52 #90574
by mmt
Replied by mmt on topic Adding DRO to new tab in axis
Thanks Andy
I just added to the INI file
[DISPLAY]
EMBED_TAB_NAME = Video
EMBED_TAB_COMMAND = mplayer -wid {XID} tv://0
whats my best (easiest) option?
I just added to the INI file
[DISPLAY]
EMBED_TAB_NAME = Video
EMBED_TAB_COMMAND = mplayer -wid {XID} tv://0
whats my best (easiest) option?
Please Log in or Create an account to join the conversation.
31 Mar 2017 11:56 #90639
by andypugh
Replied by andypugh on topic Adding DRO to new tab in axis
This might help: forum.linuxcnc.org/48-gladevcp/30587-cam...esy-and-jessie#71652
Please Log in or Create an account to join the conversation.
Time to create page: 0.074 seconds