.

24 Oct 2021 22:19 - 19 Nov 2021 04:31 #224129 by Raouf Magdy

. was created by Raouf Magdy

Last edit: 19 Nov 2021 04:31 by Raouf Magdy.

Please Log in or Create an account to join the conversation.

25 Oct 2021 05:32 #224207 by Aciera

Replied by Aciera on topic Scara Control

Not sure where you are at with things but you would want to setup and use 'scarakins' as your kinematic.

Please Log in or Create an account to join the conversation.

25 Oct 2021 12:25 - 19 Nov 2021 04:31 #224252 by Raouf Magdy

Replied by Raouf Magdy on topic .

Last edit: 19 Nov 2021 04:31 by Raouf Magdy.

Please Log in or Create an account to join the conversation.

04 Nov 2021 00:45 #225176 by andypugh

Replied by andypugh on topic Scara Control

There will be a line in your HAL file to define the kinematics.
something like "loadrt trivkins" or "loadrt scarakins"

Some kinematics info is here:
linuxcnc.org/docs/2.8/html/man/man9/kins.9.html

Details of what is inside a kinematics module here:
linuxcnc.org/docs/2.8/html/motion/kinematics.html

Please Log in or Create an account to join the conversation.

Time to create page: 0.081 seconds