EMC language X ex.siemens language
- Lccora
- Offline
- New Member
-
Less
More
- Posts: 6
- Thank you received: 0
10 Jul 2009 17:44 #511
by Lccora
EMC language X ex.siemens language was created by Lccora
I'm sorry if posting in the wrong place, but it is my first post in this forum.
I know the method of programming CNC siemens, where comparisons with work internally (IF) (GOTOF), write to variables of type (R), and I sub-programs. What EMC has to use this type of need?
sorry for the doubt, can be easy but it is my first contact with EMC2
tanks
Luciano
Brazil
I know the method of programming CNC siemens, where comparisons with work internally (IF) (GOTOF), write to variables of type (R), and I sub-programs. What EMC has to use this type of need?
sorry for the doubt, can be easy but it is my first contact with EMC2
tanks
Luciano
Brazil
Please Log in or Create an account to join the conversation.
- BigJohnT
-
- Offline
- Administrator
-
Less
More
- Posts: 7330
- Thank you received: 1177
11 Jul 2009 13:42 #515
by BigJohnT
Replied by BigJohnT on topic Re:EMC language X ex.siemens language
Luciano,
I think your asking about this:
www.linuxcnc.org/docview/html//gcode_main.html#cha:O-Codes
John
I think your asking about this:
www.linuxcnc.org/docview/html//gcode_main.html#cha:O-Codes
John
Please Log in or Create an account to join the conversation.
- Lccora
- Offline
- New Member
-
Less
More
- Posts: 6
- Thank you received: 0
13 Jul 2009 10:28 #527
by Lccora
Replied by Lccora on topic Re:EMC language X ex.siemens language
Tanks John, I
will read, write any questions here.
Luciano
will read, write any questions here.
Luciano
Please Log in or Create an account to join the conversation.
Time to create page: 0.048 seconds