1. Configuring LinuxCNC
  3. HAL
  5. openSCADA over ModBus to LCNC

openSCADA over ModBus to LCNC

  • Bari
  • Bari's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
11 Aug 2017 02:16 #97324 by Bari
openSCADA over ModBus to LCNC was created by Bari
Has anyone tried to get openSCADA talking with LCNC over ModBus?

wiki.oscada.org/HomePageEn/Doc/ModBus#h871-7

wiki.linuxcnc.org/cgi-bin/wiki.pl?ModbusToHal

Seems that ModBus to HAL is only working with ModBus slaves at this point. But I haven't tested any of this yet.

I'm looking at having openSCADA be able to work with LCNC for non real time monitoring or control.

Please Log in or Create an account to join the conversation.

  • andypugh
  • andypugh's Avatar
  • Away
  • Moderator
  • Moderator
More
14 Aug 2017 15:58 #97465 by andypugh
Replied by andypugh on topic openSCADA over ModBus to LCNC
Sounds like fun. Let us know how it goes :-)

Please Log in or Create an account to join the conversation.

  1. Configuring LinuxCNC
  3. HAL
  5. openSCADA over ModBus to LCNC
Time to create page: 0.058 seconds
Powered by Kunena Forum