Setting a signal to a constant value

27 Jun 2019 10:27 #137982 by pl7i92

Replied by pl7i92 on topic Setting a signal to a constant value

for me this code sequenz workes fine and as the user expects to be

#test
newsig pressure-ok bit
loadrt lut5 count=1
addf lut5.0 servo-thread
net pressure-ok => lut5.0.in-2
#setp lut5.0.in-2 1
sets pressure-ok TRUE

Please Log in or Create an account to join the conversation.

Time to create page: 0.105 seconds