Forum Menu

I can't get spindle speed feedback

More
4 years 10 months ago - 4 years 10 months ago #229835 by Servimet
I can't get spindle speed feedback was created by Servimet
Estimated for some reason I can't get spindle speed feedback !!
the rpm bar in the linux control is dead
I have a 7i92m-7i77 mesa set
I am very new to the linux world
I have tried several examples of hal files that I took from this forum and nothing worked so far
I attach my hal file
From already thank you very much
Last edit: 4 years 10 months ago by Servimet.

Please Log in or Create an account to join the conversation.

More
4 years 10 months ago #229852 by cmorley
Replied by cmorley on topic I can't get spindle speed feedback
Please post all your config files.

Please Log in or Create an account to join the conversation.

More
4 years 10 months ago - 4 years 10 months ago #229876 by Hakan
Replied by Hakan on topic I can't get spindle speed feedback
counter_mode 1?
If it is a quadrature encoder, which I think most are, it should be counter_mode 0
Last edit: 4 years 10 months ago by Hakan. Reason: mixed up 0 and 1

Please Log in or Create an account to join the conversation.

More
4 years 10 months ago - 4 years 10 months ago #229880 by Servimet
Replied by Servimet on topic I can't get spindle speed feedback
Dear attached all my configuration files
I still don't have rpm in the linux panel
I appreciate your help
Last edit: 4 years 10 months ago by Servimet.

Please Log in or Create an account to join the conversation.

More
4 years 10 months ago #229881 by Clive S
Replied by Clive S on topic I can't get spindle speed feedback

Dear attached all my configuration files
I still don't have rpm in the linux panel
I appreciate your help

Where have you attached them ?

Please Log in or Create an account to join the conversation.

More
4 years 10 months ago - 4 years 10 months ago #229884 by Servimet
Replied by Servimet on topic I can't get spindle speed feedback
 

File Attachment:

File Name: Sabre_1000.ini
File Size:5.02 KB

File Attachment:

File Name: custom.hal
File Size:110 B

File Attachment:

File Name: custom_gvcp.hal
File Size:114 B

File Attachment:

File Name: custom_postgui.hal
File Size:120 B
Last edit: 4 years 10 months ago by Servimet.

Please Log in or Create an account to join the conversation.

Time to create page: 0.076 seconds
Powered by Kunena Forum