The problem with hal_input and the HID device connected to it
- manager12345
- Offline
- Junior Member
-
Less
More
- Posts: 29
- Thank you received: 1
21 Nov 2023 09:30 #286151
by manager12345
Hello everyone I really need your help. I implemented hotkeys using hal_input and work well on a regular keyboard. But I decided to assemble my HID device on an arduino to make side buttons, and when I launch halmeter, the key then works out, then not, but like a normal keyboard it works out adequately. Can you tell me in which direction it is worth digging to remove this problem?
Please Log in or Create an account to join the conversation.
21 Nov 2023 14:13 #286170
by andypugh
Replied by andypugh on topic The problem with hal_input and the HID device connected to it
I thought I had replied to a question just like this?
Anyway, this is probably related to your user not being part of the plugdev group. Or the udev rules being wrong.
See this page wiki.linuxcnc.org/cgi-bin/wiki.pl?HereIsHowToCheck (and with special reference to "permissions")
Anyway, this is probably related to your user not being part of the plugdev group. Or the udev rules being wrong.
See this page wiki.linuxcnc.org/cgi-bin/wiki.pl?HereIsHowToCheck (and with special reference to "permissions")
Please Log in or Create an account to join the conversation.
Time to create page: 0.135 seconds