7I73 Pendant/control panel interface

ok 4i65 svss4_8 is available from freeby.mesanet.com/4i65_svss4_8.zip

Hi!

Thanks a lot. Now I order the 7i44 and 2x 7i73.

Have a nice day,
Thomas

Hello!

After a long time I tried the new Firmware, but now I have some troubles.

The output from dmesg:

[ 210.607524] hm2: loading Mesa HostMot2 driver version 0.15
[ 210.609248] hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7
[ 210.609269] hm2_pci: discovered 4i65 at 0000:04:00.0
[ 210.609313] hm2_4i65.0: firmware: requesting hm2/4i65/SVSS4_8.BIT
[ 210.935897] hm2/hm2_4i65.0: inconsistent Module Descriptor for Smart Serial Interface, not loading driver
[ 210.935900] hm2/hm2_4i65.0: Version = 0, expected 0
[ 210.935903] hm2/hm2_4i65.0: NumRegisters = 6, expected 6
[ 210.935905] hm2/hm2_4i65.0: InstanceStride = 0x00000010, expected 0x00000040
[ 210.935908] hm2/hm2_4i65.0: MultipleRegisters = 0x0000003C, expected 0x0000003C
[ 210.935910] hm2/hm2_4i65.0: inconsistent Module Descriptor!
[ 210.935913] hm2/hm2_4i65.0: failed to parse Module Descriptor 4
[ 210.935917] hm2_4i65.0: board fails HM2 registration
[ 210.935924] hm2_pci: probe of 0000:04:00.0 failed with error -22
[ 211.148731] hm2: unloading

Is there anywhere sample configuration with the 7i73.

Have a nice evening,
Thomas

Oops sorry, thats my fault.
I'll make a new bitfile with that fixed
but it may have to wait till Monday if
I'm not around work anytime this weekend.

OK _correct_ 4i65 svss4_8 is available from freeby.mesanet.com/4i65_svss4_8.zip

Hello!

Now the 7i73 is working. I connected a MPG and it works properly.

Only one question left: How can I access the analog input( IN 0..3)?

This is very helpfully for spindle and feed overwrite,

Thanks a lot for the corrected firmware.

Thomas