7i76 Analog out
- uli12us
- Offline
- Premium Member
-
Less
More
- Posts: 103
- Thank you received: 2
17 Aug 2014 16:56 #49970
by uli12us
7i76 Analog out was created by uli12us
In the 7i76 board I must connect a source to the analog out connector, that voltage must be from 5 to 15VDC.
Am I right, its not possible, to drive +/- 10V from the analog out.
Thats not really important, because the output will drive an asynchronous Tool turret, but I better ask before I kill the board, when I connect + and - 10V.
Am I right, its not possible, to drive +/- 10V from the analog out.
Thats not really important, because the output will drive an asynchronous Tool turret, but I better ask before I kill the board, when I connect + and - 10V.
Please Log in or Create an account to join the conversation.
- PCW
-
- Offline
- Moderator
-
Less
More
- Posts: 17904
- Thank you received: 4774
17 Aug 2014 21:24 #49975
by PCW
Replied by PCW on topic 7i76 Analog out
20V (+-10) will exceed the maximum power supply range of the 7I76s
isolated analog output section. Its really intended only for 0 to 10V
or 0 to12V applications
isolated analog output section. Its really intended only for 0 to 10V
or 0 to12V applications
Please Log in or Create an account to join the conversation.
Moderators: PCW, jmelson
Time to create page: 0.054 seconds