7i40 manual issue
23 Sep 2017 11:15 #99322
by billykid
7i40 manual issue was created by billykid
regarding the encoder selection ttl or rs422
W1 or W6 are on the left hand position, differential mode is selected. page 3
The differential encoder inputs are enabled when W6
(channel 0) or W1 (channel 1) are in the right hand position. page 9
regards
Mauro
W1 or W6 are on the left hand position, differential mode is selected. page 3
The differential encoder inputs are enabled when W6
(channel 0) or W1 (channel 1) are in the right hand position. page 9
regards
Mauro
Please Log in or Create an account to join the conversation.
27 Jan 2023 22:04 #263028
by billykid
Replied by billykid on topic 7i40 manual issue
I wrote years ago but it seems to me that the manual is always like this... which page is right, 3 or 9?
Please Log in or Create an account to join the conversation.
27 Jan 2023 22:22 - 28 Jan 2023 00:13 #263030
by PCW
Replied by PCW on topic 7i40 manual issue
page 9 is wrong
(fixed in rev 1.3 manual)
(fixed in rev 1.3 manual)
Last edit: 28 Jan 2023 00:13 by PCW.
The following user(s) said Thank You: billykid
Please Log in or Create an account to join the conversation.
Time to create page: 0.063 seconds