Mesa 7i92m Individual Bitfile

its a long way till here
as short as it has been 1week in Mesa Eth workes fine
Mashine Refit needs full rewirer OR
"SIMPLY" Bitfile Change

SOMEONE That can CHANGE -> Recompile the VHD to BIT in here

Starting from 5ABOB2xD
NEED is
Configuration pin-out:

IO Connections for P2
Pin# I/O Pri. func Sec. func Chan Pin func Pin Dir

1 0 IOPort PWM 0 PWM (Out)
14 1 IOPort None
2 2 IOPort StepGen 0 Step/Table1 (Out)
15 3 IOPort None
3 4 IOPort StepGen 0 Dir/Table2 (Out)
16 5 IOPort None 0 (Out)
4 6 IOPort StepGen 1 Step/Table1 (Out)
17 7 IOPort None 0 (Out)
5 8 IOPort StepGen 1 Dir/Table2 (Out)
6 9 IOPort StepGen 2 Step/Table1 (Out)
7 10 IOPort StepGen 2 Dir/Table2 (Out)
8 11 IOPort None 0 (Out)
9 12 IOPort None 0 (Out)
10 13 IOPort None
11 14 IOPort QCount 0 Quad-A (In)
12 15 IOPort QCount 0 Quad-B (In)
13 16 IOPort QCount 0 Quad-IDX (In)

IO Connections for P1
Pin# I/O Pri. func Sec. func Chan Pin func Pin Dir

1 17 IOPort PWM 1 PWM (Out)
14 18 IOPort None
2 19 IOPort StepGen 3 Step/Table1 (Out)
15 20 IOPort None
3 21 IOPort StepGen 3 Dir/Table2 (Out)
16 5 IOPort None 0 (Out)
4 6 IOPort StepGen 4 Step/Table1 (Out)
17 7 IOPort None 0 (Out)
5 25 IOPort StepGen 4 Dir/Table2 (Out)
6 26 IOPort StepGen 5 Step/Table1 (Out)
7 27 IOPort StepGen 5 Dir/Table2 (Out)
8 11 IOPort None 0 (Out)
9 12 IOPort None 0 (Out)
10 30 IOPort None
11 31 IOPort QCount 1 Quad-A (In)
12 32 IOPort QCount 1 Quad-B (In)
13 33 IOPort QCount 1 Quad-IDX (In)


####### I Did provide the PIN and VHD so if someone can compile this please Help
Thank you so far