Parallel port directly to Servo Drives
05 Feb 2020 09:04 #156562
by bbsr_5a
Replied by bbsr_5a on topic Parallel port directly to Servo Drives
PC freezing
is this a Plasma Machine
then change the MOUSE no Joke modern mouses do get lots of EM use a old fashion 3button logitech and all problems are gone
is this a Plasma Machine
then change the MOUSE no Joke modern mouses do get lots of EM use a old fashion 3button logitech and all problems are gone
Please Log in or Create an account to join the conversation.
14 Feb 2020 22:34 #157381
by andypugh
Actually, good point. I had a freezing problem with my Mill controller (LinuxCNC worked perfectly, never missed a beat, and the parts came out fine, but the UI stopped responding). The answer was to unplug the wireless mini-keyboard dongle except when I wanted to use the keyboard.
I was clued in to this by looking at the logs and seeing 10 USB connect/disonnects per second happening.
Replied by andypugh on topic Parallel port directly to Servo Drives
PC freezing
is this a Plasma Machine
then change the MOUSE no Joke modern mouses do get lots of EM use a old fashion 3button logitech and all problems are gone
Actually, good point. I had a freezing problem with my Mill controller (LinuxCNC worked perfectly, never missed a beat, and the parts came out fine, but the UI stopped responding). The answer was to unplug the wireless mini-keyboard dongle except when I wanted to use the keyboard.
I was clued in to this by looking at the logs and seeing 10 USB connect/disonnects per second happening.
Please Log in or Create an account to join the conversation.
Time to create page: 0.140 seconds